A239-95(2004) |
用普力斯试验法(硫酸铜浸蚀)确定铁或钢制品上镀锌层最薄点的测试方法 |
Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles |
A240/A240M-04ae1 |
压力容器用耐热铬及铬镍不锈钢板、薄板及带材 |
Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A242/A242M-04 |
高强度低合金结构钢 |
Standard Specification for High-Strength Low-Alloy Structural Steel |
A247-67(1998) |
铁铸件中石墨显微结构评定试验方法 |
Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings |
A249/A249M-04 |
锅炉、过热器、换热器和冷凝器用焊接奥氏体钢管 |
Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
A250/A250M-04 |
锅炉和过热器用电阻焊铁素体合金钢管 |
Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes |
A252-98(2002) |
焊接钢和无缝钢管桩 |
Standard Specification for Welded and Seamless Steel Pipe Piles |
A254-97(2002) |
铜焊钢管规格 |
Standard Specification for Copper-Brazed Steel Tubing |
A255-02 |
测定钢淬透性用末端淬火试验的标准试验方法 |
Standard Test Method for Determining Hardenability of Steel |
A262-03 |
奥氏体不锈钢晶间浸蚀敏感性的检测 |
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
A263-03 |
耐腐蚀铬钢包覆板材,薄板材及带材技术规范 |
Standard Specification for Stainless Chromium Steel-Clad Plate |
A264-03 |
包覆的不锈铬镍钢板，薄板及带材规格 |
Specification for Stainless Chromium-Nickel Steel-Clad Plate |
A265-03 |
镍和镍基合金包覆钢板规格 |
Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate |
A266/A266M-03a |
压力容器部件用碳素钢锻件规格 |
Standard Specification for Carbon Steel Forgings for Pressure Vessel Components |
A268/A268M-04 |
一般设备用无缝和焊接铁素体与马氏体不锈钢管 |
Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
A269-04 |
一般设备用无缝和焊接奥氏体不锈钢管 |
Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
A270-03a |
卫生设施用无缝钢和焊接奥氏体不锈钢管 |
Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing |
A275/A275M-98(2003) |
钢锻件的磁粉检查试验方法 |
Standard Test Method for Magnetic Particle Examination of Steel Forgings |
A276-04 |
不锈钢棒材和型材 |
Standard Specification for Stainless Steel Bars and Shapes |
A278/A278M-01 |
适用于650F容压部件用灰铸铁件的技术规范 |
Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C) |
A283/A283M-03 |
低和中等抗拉强度碳素钢板 |
Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates |
A285/A285M-03 |
压力容器用低和中等抗拉强度的碳素钢板 |
Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength |
A288-91(2003) |
涡轮发电机磁性定位环用碳素钢和合金钢锻件 |
Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators |
A289/A289M-97(2003) |
发电机非磁性定位环用合金钢锻件的技术规范 |
Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators |
A290-02 |
减速器环用碳素钢和合金钢锻件 |
Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears |
A291-03 |
减速器小齿轮、齿轮和心轴用碳素钢和合金钢锻件 |
Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears |
A295-98 |
高碳耐磨轴承钢技术规范 |
Standard Specification for High-Carbon Anti-Friction Bearing Steel |
A297/A297M-97(2003) |
一般用耐热铬铁与镍铬铁合金钢铸件规格 |
Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application |
A299/A299M-04 |
压力容器用锰硅碳钢板 |
Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon |
A302/A302M-03 |
压力容器用锰钼和锰钼镍合金钢板 |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
A304-04 |
有末端淬火淬透性要求的合金钢棒材的技术规范 |
Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements |
A307-04 |
抗拉强度为60000psi的碳素钢螺栓和螺柱的技术规范 |
Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength |
A308/A308M-03 |
经热浸处理镀有铅锡合金的薄板材的技术规范 |
Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process |
A309-01 |
用三点试验法测定长镀锌薄钢板镀层的重量成分的试验方法 |
Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test |
A311/A311M-04 |
有机械性能要求的消除应力的冷拉碳素钢棒 |
Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements |
A312/A312M-04a |
无缝和焊接奥氏体不锈钢管 |
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
A313/A313M-03 |
不锈钢弹簧丝技术规范 |
Standard Specification for Stainless Steel Spring Wire |
